Pale Pistachio Blackout No Drill Electric Roller Blind

Grip Fit by Louvolite is an amazing new system allowing you to install your blind in seconds with no drilling, or any tools for that matter required. The attractive cassette ensures a modern, clean finish that snugly fits your window.

As no drilling is required, Grip Fit is perfect for DIYer’s of all ability. This solution is a particularly great solution for:

• Rented properties, where you aren’t allowed to drill


• Tiled window recesses such as bathrooms, removing the worry of cracking tiles when drilling.


• Windows with steel lintels, that can be a nightmare to drill through.

Is my window suitable for grip fit?

• This blind system can be installed within a window recess only. You cannot fit this blind outside the window recess.


• The grip fit system blind is held in place using a pressure fit system that exerts up to 60kg of outward pressure when fitted. For this reason you need to check that your wall is solid enough to take this pressure.
  For example, if your walls are plastered but have a void behind them then your recess may not be suitable.


• The cassette is 8cm deep, so your recess must be at least this deep in order to house the blind


• Are your walls parallel? Your walls need to be parallel where you plan to install the blind.

Your grip fit blind comes ready to install with the following features:

• Aluminium cassette that is 8cm deep and 7cm tall.


• The cassette will be filled with the fabric you have chosen the blind to be made in.


• Features plastic cassette covers that slide out to ensure a seamless finish.


• The blind will be reverse rolled (Rolling off the front of the tube).


• Mounted on an aluminium tube.


• Powered by a motor with embedded lithium battery.


• On average the battery will need charging every 9-12 months


• The fabric is cut 4.2cm smaller than your recess size. As with all roller blinds this means you will have light enter either side of the blind.